Hi, i\'m doing a group project using 8051 interface with PC. I\'ve tried to send input on P1 to serial port in 1 sec interval and observe the output on VB. I connect some pins to ground when i want to make it low while leave other pins...
It is also possible to configure the VMB5000A to provide 2 USB plus 1UARTport or 2UARTports (1 high speed). The device also has on-board flash memory. Full data and application details are available from the Elan website....
The MAX3100 contain a crystal oscillator and a baud-rate maker with software-programmable separator ratios for all ordinary baud rates from 300 baud to 230k.
I experience an overrun error when using anuart. Sending data works fine, but when I use the drivers to read out data I get an overrun error (in the CSR register) and the drivers fails. The RXRDY in CSR is 0 and RXBUFF = 0 (at least in...
PLC-UARTis designed to transparently move serial data over the AC or DC power line network installed in your home or office. These units have the distinct advantage over protocols like X10. The PLC-UARTcommunicates bidirectionally and...